2021/09/21 by Wanghua Wu, Chih-Wei Yao, Chengkai Guo +6 · 14 citations
Engineering · #Advancements in PLL and VCO Technologies #Radio Frequency Integrated Circuit Design #Photonic and Optical Devices
paper · doi:10.1109/jssc.2021.3111134
This work presents a 6-GHz low-jitter and high figure-of-merit (FoM) fractional-<inline-formula> <tex-math notation="LaTeX">N </tex-math></inline-formula> phase-locked loop (PLL). It uses a digital-to-time converter (DTC)-based sampling PLL architecture. To achieve ultra-low jitter in fractional-<inline-formula> <tex-math notation="LaTeX">N </tex-math></inline-formula> mode, a phase detector range reduction technique is used to halve the required DTC delay range (DR), resulting in lower thermal noise and better DTC linearity. Moreover, a reconfigurable dual-core voltage-controlled oscillator (VCO) provides extra freedom in power and jitter tradeoff. It achieves 83.4-fs rms jitter in fractional-<inline-formula> <tex-math notation="LaTeX">N </tex-math></inline-formula> mode, integrated from 10 kHz to 100 MHz, with a 76.8-MHz crystal oscillator (XO) reference. In the low-power mode, the rms jitter degrades to 96.3 fs and the PLL FoM improves from −250.1 to −251.2 dB, as the PLL power consumption reduces from 14.2 to 8.2 mW. The measured fractional spurs are less than −70 dBc for near-integer channels. The PLL rms jitter remains within 100 fs across the 5–7-GHz output frequency band, thanks to the digital background calibrations. It is implemented in a 14-nm FINFET process and occupies 0.31 mm<sup>2</sup>.