Handbook of SiC properties for fuel performance modeling

2007/05/11 by Lance L. Snead, Takashi Nozawa, Yutai Katoh +4 · 14 citations
Materials Science · #Advanced ceramic materials synthesis #Nuclear Materials and Properties #Fusion materials and technologies

paper · doi:10.1016/j.jnucmat.2007.05.016

Cited by

• Accident tolerant fuel cladding development: Promise, status, and challenges
• Preliminary assessment of accident-tolerant fuels on LWR performance during normal operation and under DB and BDB accident conditions
• Investigations on the irradiation stability at 300 °C of the carbon black dispersed silicon carbide for nuclear applications
• TRISO burnup-dependent failure analysis in FHRs using BISON
• Primary radiation damage in 3C-SiC under strain field studied with molecular dynamics simulation
• Application of neutron transmutation technology to control the physical properties of nanoparticles at the atomic scale
• Fully ceramic microencapsulated fuel in prismatic high-temperature gas-cooled reactors: Design basis accidents and fuel cycle cost
• Current status of materials development of nuclear fuel cladding tubes for light water reactors
• Neutronic design and analysis of the accident-tolerant fuel (ATF) application to VVER-1000 nuclear reactor as well as evaluation of dynamic parameters
• Evaluation of silicon carbide as a divertor armor material in DIII-D H-mode discharges
• Comparison of Cavities Formed in Single Crystalline and Polycrystalline α-SiC after H Implantation
• SiC-TGAP: A machine learning interatomic potential for radiation damage simulations in 3C-SiC
• Modeling of silver transport in cubic SiC: Integrating molecular dynamics, bounds averaging, and uncertainty quantification
• Characteristics of Composite Silicon Carbide Fuel Cladding after Irradiation under Simulated PWR Conditions