Accident tolerant fuel cladding development: Promise, status, and challenges

2018/01/12 by Kurt A. Terrani · 29 citations
Materials Science · Engineering · #Nuclear Materials and Properties #Fusion materials and technologies #Nuclear reactor physics and engineering

paper · doi:10.1016/j.jnucmat.2017.12.043

Citations

• Development and property evaluation of nuclear grade wrought FeCrAl fuel cladding for light water reactors
• The effect of fuel thermal conductivity on the behavior of LWR cores during loss-of-coolant accidents
• Influence of the Cr content on the permeation of hydrogen in Fe alloys
• Current status and critical issues for development of SiC composites for fusion applications
• Preliminary assessment of accident-tolerant fuels on LWR performance during normal operation and under DB and BDB accident conditions
• Handbook of SiC properties for fuel performance modeling

Cited by

• High temperature oxidation and microstructural evolution of cold spray chromium coatings on Zircaloy-4 in steam environments
• The oxidation-dissolution behavior of Cr-coated Zr alloy in high temperature water
• A study of the oxidation behaviour of FeCrAl-ODS in air and steam environments up to 1400 °C
• Pellet-cladding mechanical interaction analysis of Cr-coated Zircaloy cladding
• Assessment and predicting the effect of accident tolerant fuel composition and geometry on neutronic and safety parameters in small modular reactors via artificial neural network and adaptive neuro-fuzzy inference system
• Design parameters sensitivity analysis of dispersed plate-type nuclear fuel in Reactivity Insertion Accident
• Influence of internal defects on filament wound SiC/SiC composite tubes on their mechanical behavior under uniaxial tension
• Bringing nuclear materials discovery and qualification into the 21 st century. [europepmc]
• Understanding the interface interaction between U 3 Si 2 fuel and SiC cladding. [europepmc]
• Investigation of Microstructure and Nanoindentation Hardness of C + & He + Irradiated Nanocrystal SiC Coatings during Annealing and Corrosion. [europepmc]
• High-Entropy Alloys for Advanced Nuclear Applications. [europepmc]
• Radiation-Induced Sharpening in Cr-Coated Zirconium Alloy. [europepmc]
• Significant Improvement of Mechanical Properties of SiC-Nanowire-Reinforced SiC f /SiC Composites via Atomic Deposition of Ni Catalysts. [europepmc]
• The Preparation of Amorphous ZrC/Nanocrystalline Ni Multilayers and the Resistance to He + Irradiation. [europepmc]
• Corrosion Behavior of Al x (CrFeNi) 1-x HEA under Simulated PWR Primary Water. [europepmc]
• Hydrothermal Corrosion of SiC Coupons Suppressed by Magnetron Sputtered Cr Coatings. [europepmc]
• An Orthogonal Experimental Study on the Preparation of Cr Coatings on Long-Size Zr Alloy Tubes by Arc Ion Plating. [europepmc]
• Plasma Nitriding of Inner Surface of Slender Tubes using Small Diameter Helicon Plasma. [europepmc]
• Evaluation of Hydrogen Gettering Rates Correlated to Surface Composition and Texture of Nickel-Plated Zircaloy Getters of Different Heat Treatment Procedures. [europepmc]
• Aspects of Applied Chemistry Related to Future Goals of Safety and Efficiency in Materials Development for Nuclear Energy. [europepmc]
• Structural Evolution and Transitions of Mechanisms in Creep Deformation of Nanocrystalline FeCrAl Alloys. [europepmc]
• Research Progress of ODS FeCrAl Alloys-A Review of Composition Design. [europepmc]
• Corrosion Degradation Mechanism of Cr-Coated Zr-4 Alloy under Simulated Nuclear Conditions for Accident-Tolerant Fuel. [europepmc]
• Nanoindentation Test of Ion-Irradiated Materials: Issues, Modeling and Challenges. [europepmc]
• Using the Radial-Shear Rolling Method for Casted Zirconium Alloy Ingot Structure Improvement. [europepmc]
• Microstructure Controlling, Properties, and Thermodynamic Analysis of SiC Joints Brazed with Ni-Ti Fillers. [europepmc]
• Iron-Based High-Temperature Alloys: Alloying Strategies and New Opportunities. [europepmc]
• Corrosion Behaviors of ZrSi Coating by Laser Cladding on Zr-4 Alloy in High-Temperature Steam. [europepmc]
• Laser Technologies of Welding, Surfacing and Regeneration of Metals with HCP Structure (Mg, Ti, Zr): State of the Art, Challenges and Prospects. [europepmc]