2017/02/22 by Yue Hu, Hu, Yue, Curtis R. Menyuk +11
Engineering · Physics and Astronomy · #Advanced Photonic Communication Systems #FOS: Physical sciences #Instrumentation and Detectors (physics.ins-det) #Photonic and Optical Devices #Semiconductor Quantum Structures and Devices
paper · pdf · doi:10.48550/arxiv.1702.07732
openalex publication_date 2017/02/22 · openalex created_date 2019/06/27 · openalex updated_date 2026/07/28
We calculate the amplitude-to-phase (AM-to-PM) noise conversion in a modified unitraveling carrier (MUTC) photodetector. We obtained two nulls as measured in the experiments, and we explain their origin. The nulls appear due to the transit time variation when the average photocurrent varies, and the transit time variation is due to the change of electron velocity when the average photocurrent varies. We also show that the AM-to-PM conversion coefficient depends only on the pulse energy and is independent of the pulse duration when the duration is less than 500 fs. When the pulse duration is larger than 500 fs, the nulls of the AM-to-PM conversion coefficient shift to larger average photocurrents. This shift occurs because the increase in that pulse duration leads to a decrease in the peak photocurrent. The AM-to-PM noise conversion coefficient changes as the repetition rate varies. However, the repetition rate does not change the AM-to-PM conversion coefficient as a function of input optical pulse energy. The repetition rate changes the average photocurrent. We propose a design that would in theory improve the performance of the device.