2019/10/02 by Lucas Jaloustre, S. Le Denmat, Jaloustre, L. +11
Engineering · Physics and Astronomy · #Acoustic Wave Resonator Technologies #Advanced MEMS and NEMS Technologies #Applied Physics (physics.app-ph) #FOS: Physical sciences #Force Microscopy Techniques and Applications #Materials Science (cond-mat.mtrl-sci)
paper · pdf · doi:10.48550/arxiv.1910.01187
openalex publication_date 2019/10/02 · openalex created_date 2019/10/10 · openalex updated_date 2026/07/28
Piezoelectric semiconductor III-Nitride nanostructures have received increasing interest as an alternative material for energy harvesters, sensors, and self-sustainable electronics, demanding well-clarification of their piezoelectric behavior. Despite the feasibility of piezoresponse force microscopy (PFM) to resolve piezo-responses at the nanoscale, several difficulties arise when the measurements are performed on low piezo-coefficient materials due to various artifacts. This work shows that semi-quantitative PFM on low piezo-coefficient III-Nitrides can be achieved in high-aspect-ratio nanostructures such as nanowires or nanorods. For conventional bulks and thin films, accurate determination of their piezoresponses is limited because of clamping and bending effects which can occur simultaneously during PFM measurements. While the clamping effect only reduces the piezoresponse amplitude, the bending motion either increases or decreases this amplitude and can also rotate the phase by 180°. Improved electric field distribution in nanowires minimizes both artifacts, allowing correct determinations of crystal polarities and piezo-coefficients. In contrast to the reports in the literature, we do not observe giant piezoelectricity in III-N nanowires with a diameter in the range of 30-80 nm. This work provides an access to fundamental parameters for developing III-N based piezoelectric nano-devices.