2021/03/24 by Peyman Lahe Motlagh, Motlagh, Peyman Lahe, Ipek Basdogana +1
Engineering · #Acoustic Wave Phenomena Research #Aeroelasticity and Vibration Control #Computational Geometry (cs.CG) #FOS: Computer and information sciences #Innovative Energy Harvesting Technologies
paper · pdf · doi:10.48550/arxiv.2103.13179
openalex publication_date 2021/03/24 · openalex created_date 2025/10/10 · openalex updated_date 2026/07/28
Two-dimensional thin plates are widely used in many applications. Shunt damping is a promising way for the attenuation of vibration of these electromechanical systems. It enables a compact vibration damping method without adding significant mass and volumetric occupancy. Analyzing the dynamics of such electromechanical systems requires precise modeling tools that properly consider the coupling between the piezoelectric elements and the host structure. Although the concept of shunt damping has been studied extensively in the literature, most of the studies do not provide a formulation for modeling the multiple piezoelectric patches that are scattered on the host structure and shunted separately. This paper presents a methodology and a formulation for separately shunted piezoelectric patches for achieving higher performance on vibration attenuation. The Rayleigh-Ritz method is used for performing modal analysis and obtaining the frequency response functions of the electro-mechanical system. The developed model includes mass and stiffness contribution of the piezoelectric patches as well as the electromechanical coupling effect. In this study, the piezoelectric patches are shunted via separate electrical circuits and compared with the ones those are shunted via interconnected electrical circuits. For verification, system-level finite element simulations are performed in ANSYS software and compared with the analytical model results. An experimental setup is also built to validate the performance of the separately shunted piezoelectric patches. The effectiveness of the method is investigated for a broader range of frequencies and it was shown that separately shunted piezoelectric patches are more effective compared to connected for a wide range of frequencies.