2025/01/04 by Fatemeh A. Talebi, Fatemeh Talebi, Arash Rabbani +5
Engineering · #Additive Manufacturing and 3D Printing Technologies #Adhesion #Adhesion, Friction, and Surface Interactions #Composite material #Computer science #Drop (telecommunication) #Engineering #Granular flow and fluidized beds #Materials science #Mechanical engineering #Window (computing)
paper · doi:10.1016/j.powtec.2024.120605
openalex publication_date 2025/01/04 · openalex created_date 2025/10/10 · openalex updated_date 2026/07/28
Powder adhesion often presents challenges within the pharmaceutical industry as it significantly affects powder flowability. While measuring adhesion alone cannot resolve powder flow problems, understanding its relationship with powder flow, especially through modelling, presents a major advancement. Traditional approaches such as atomic force microscopy (AFM) and centrifuge method were previously utilised to measure the adhesive force of particles, however, these methods are both time and cost intensive necessitating the need for a more practical solution. This work endeavoured to investigate and develop a window of operation for measuring the effective work of adhesion of both regular and irregularly shaped powders using the drop test method. For optimisation and accuracy in obtaining the critical diameter of adhesion, the drop test rig was further developed so as to ensure reliable and repeatable measurements of the impact velocity and contact time, which previously posed major challenges. The effective work of adhesion of ibuprofen powders across different sample volumes was measured, to establish a minimum number of analysed particles for ensuring the accuracy of the measured critical diameter. A minimum of 640 ibuprofen particles was required resulting into an effective work of adhesion of 19.6 ± 2.9 mJ/m 2 . Moreover, the approach was tested on spherical particles, where effective work of adhesion of spherical Aluminium-alloy powders (7.7 ± 1.8 mJ/m 2 ) was assessed. Furthermore, artificial intelligence is incorporated in parallel to effectively determine the critical diameter and compare it to the manually calculated values allowing for an efficient image analysis. • The drop test method is used to measure the adhesion of powders. • A window of operation for the adhesion measurement using the drop test method is defined. • Automated image analysis for the detection of the critical particle diameter has been utilised.