Arcjet Tests and Thermal Response Analysis for Dual-Layer Woven Carbon Phenolic

2018/04/12 by Frank S. Milos, Yih-Kanq Chen, Milad Mahzari · 3 citations
Mathematics · Materials Science · Engineering · #Gas Dynamics and Kinetic Theory #Diamond and Carbon-based Materials Research #Plasma and Flow Control in Aerodynamics

paper · pdf · doi:10.2514/1.a34142

Abstract

A new dual-layer carbon phenolic manufactured from a three-dimensional woven substrate was tested in three arcjet facilities over a range of environments up to heat flux of approximately at pressure of 5 bar. Sample geometries included both stagnation and wedge models. Based on property measurements and the observed material response, a midfidelity thermal response and ablation model was developed. The material and tests are described, and predictions of recession and temperature are compared with the arcjet test data.

Citations

• Ablation and Thermal Response Property Model Validation for Phenolic Impregnated Carbon Ablator

Cited by

• Thermal Ablation Experiments of Carbon Phenolic and SiC-Coated Carbon Composite Materials Using a High-Velocity Oxygen-Fuel Torch. [europepmc]
• Arc-Jet Tests of Carbon-Phenolic-Based Ablative Materials for Spacecraft Heat Shield Applications. [europepmc]
• Thermal Behavior of Carbon-Phenolic/Silica Phenolic Dual-Layer Ablator Specimens through Arc-Jet Tests. [europepmc]

Related

• Ablation and Thermal Response Property Model Validation for Phenolic Impregnated Carbon Ablator
• Carbon Materials With Conductivity Gradients Allow Dynamic Screening of Steep Temperature Differences Along Thin Films
• Mechanical and Surface Characterization of Diamond-Like Carbon Coatings onto Polymeric Substrate
• Review—Carbon Cloth as a Versatile Electrode: Manufacture, Properties, Reaction Environment, and Applications
• Role of substrate temperature at graphene synthesis in arc discharge