2024/10/18 by Simon Beelen, M.J.J. Nijhof, Beelen, Simon +7
Engineering · #Applied Physics (physics.app-ph) #FOS: Physical sciences #Fluid Dynamics (physics.flu-dyn) #Material Properties and Processing
paper · pdf · doi:10.48550/arxiv.2410.14415
openalex publication_date 2024/10/18 · openalex created_date 2025/10/10 · openalex updated_date 2026/07/28
Bubble curtains are widely used to protect marine life from exposure to noise during offshore construction. However, operating a bubble curtain is costly. Therefore optimizing the acoustic effect of the available air is important. An interesting approach is to split the airflow rate into two separate bubble curtains, rather than one single curtain. This concept is tested experimentally and numerically. The experiments and the model show an increase in performance of the compressed air when it is split between two manifolds. An increased insertion loss of up to 11dB is measured. This increase in performance is possibly due to the fact that the reflective properties of the bubble curtains are maintained when halving the airflow rate. In effect, by splitting the airflow a second acoustic barrier is added. Additionally, the variations in the bubble curtain performance between individual measurements are shown to be largely caused by temporal variations in the air distribution. The applicability of equivalent fluid models for bubble curtains is discussed, and it is shown that accounting for a gap in the bubble curtain, close to the manifold where the bubble curtain is not fully developed, results in better agreement between the modelled and the measured insertion loss.