2007/05/01 by Mihaela Mihai, Michel A. Huneault, Basil D. Favis · 1 citation
Materials Science · #biodegradable polymer synthesis and properties #Polymer Foaming and Composites #Electrospun Nanofibers in Biomedical Applications #Materials science #Blowing agent #Thermoplastic #Differential scanning calorimetry #Polystyrene #Extrusion #Composite material #Rheometry #Starch #Polymer blend #Scanning electron microscope #Polypropylene #Polymer #Copolymer #Polyurethane
paper · doi:10.1177/0021955x07076532
openalex publication_date 2007/05/01 · openalex created_date 2025/10/10 · openalex updated_date 2026/07/02
This study investigates the fabrication of extruded foams from polystyrene/thermoplastic starch (PS/TPS) blends. A specially designed twinscrew extrusion process is used for starch gelatinization, PS incorporation, polymer mixing, and blowing agent incorporation. In-line rheometry is used to monitor the viscosity of the TPS/PS blends and to evaluate the plasticizing effect of 1,1,1,2 tetrafluoroethane (HFC-134a) used as blowing agent. Differential scanning calorimetry, scanning electron microscopy, density measurement, and picnometry are used to evaluate the thermal properties, the blend morphology, and the foam cell structure. Glycerol content in the TPS phase and the TPS content in the overall blend have a strong effect on the blend viscosity and, in turn, on the ability to foam the material. The foams blown with the hydrofluorocarbone alone have large open-cell content and their density cannot be reduced below 170 kg/m 3 . The addition of a small amount of ethanol however results in three-fold reductions in density and much better foam cell homogeneity.