Surface Tension of <i>N</i>-Methyldiethanolamine in Methanol or in Methanol Aqueous Solutions as a Solvent at Temperatures from 293.15 to 323.15 K

2020/12/31 by Estrella Álvarez, Fernando Cerdeira, F. Cerdeira +3
Chemical Engineering · Engineering · #Thermodynamic properties of mixtures #Carbon Dioxide Capture Technologies #Phase Equilibria and Thermodynamics

paper · doi:10.1021/acs.jced.0c00846

Abstract

The surface tension of N-methyldiethanolamine in methanol, or in methanol aqueous solutions as a solvent, was measured at temperatures from 293.15 to 323.15 K. In ternary mixtures, five methanol + water blends with concentrations between 10 and 90% methanol were used as solvents, and the amine concentration varied from 0 to 50% mass, while in the methanol + N-methyldiethanolamine (MDEA) system, the amine concentration varied between 0 and 100% mass, at intervals of 10%. Experimental data were correlated with temperature and concentration by means of the Jasper equation, and the Jouyban–Acree and FLW models, respectively.

Related

• Surface Tension of Aqueous Solutions of Diethanolamine and Triethanolamine from 25 °C to 50 °C
• Surface Tension of Binary Mixtures of Water + Monoethanolamine and Water + 2-Amino-2-methyl-1-propanol and Tertiary Mixtures of These Amines with Water from 25 °C to 50 °C
• Measurement and Correlation of the Surface Tension−Temperature Relation for Methanol
• Density, Speed of Sound, Viscosity, Surface Tension, and Excess Volume of <i>N</i>-Ethyl-2-pyrrolidone + Ethanolamine (or Diethanolamine or Triethanolamine) from <i>T</i> = (293.15 to 323.15) K
• Viscosity Measurement and Correlation of Unloaded and CO₂-Loaded Aqueous Solutions of <i>N</i>-Methyldiethanolamine-Piperazine