2008/06/19 by Vikas Anant, Andrew J. Kerman, Eric A. Dauler +3
Chemistry · Computer Science · Engineering · Physics and Astronomy · #Photonic and Optical Devices #Quantum Information and Cryptography #Spectroscopy and Laser Applications #physics.ins-det #physics.optics
paper · pdf · doi:10.1364/oe.16.010750
will appear in optics express with minor revisions
arxiv created 2008/06/19 · openalex publication_date 2008/07/03 · arxiv updated 2009/12/01 · openalex created_date 2025/10/10 · openalex updated_date 2026/07/28
We measured the optical absorptance of superconducting nanowire single photon detectors. We found that 200-nm-pitch, 50%-fill-factor devices had an average absorptance of 21% for normally-incident front-illumination of 1.55-microm-wavelength light polarized parallel to the nanowires, and only 10% for perpendicularly-polarized light. We also measured devices with lower fill-factors and narrower wires that were five times more sensitive to parallel-polarized photons than perpendicular-polarized photons. We developed a numerical model that predicts the absorptance of our structures. We also used our measurements, coupled with measurements of device detection efficiencies, to determine the probability of photon detection after an absorption event. We found that, remarkably, absorbed parallel-polarized photons were more likely to result in detection events than perpendicular-polarized photons, and we present a hypothesis that qualitatively explains this result. Finally, we also determined the enhancement of device detection efficiency and absorptance due to the inclusion of an integrated optical cavity over a range of wavelengths (700-1700 nm) on a number of devices, and found good agreement with our numerical model.