2026/07/31 by Michael Bottom, Gustav Pettersson, Pavaman Bilgi +5
Physics and Astronomy · #astro-ph.IM #physics.ins-det
Proceedings of the SPIE Astronomical Telescopes + Instrumentation. 19 pages
arxiv created 2026/07/31 · arxiv updated 2026/08/04
Read noise in infrared sensor arrays remains a major obstacle for ground- and space-based astronomy. It has long been recognized that the upcoming extremely large telescopes cannot meet their full potential unless read noise is significantly improved, and it is also a prohibitive constraint on the Habitable Worlds Observatory, a space telescope with the goal of detection and characterization of nearby Earth-like exoplanets. The main strategy for lowering read noise is averaging through multiple non-destructive reads. However, this typically results in less noise reduction than the 1/√(N) scaling predicted by theory. In this work, we show the poor averaging behavior can largely be explained by readout glow, photon emission from the sensor electronics that generates photoelectrons in the pixels during readout. Because glow accumulates with reads rather than averaging, this imposes a fundamental noise floor of σ\rm min ~ 1.5 sigmaRN^(1/2)G^(1/4). This limits averaging in HxRG-like sensors to about 2-3 e- of noise, and linear-mode avalanche photodiodes (LmAPDs) to about 0.5 e-. We present laboratory data using both sensor architectures, with the LmAPD following the predicted noise value to within 0.1 e- over two decades of averaging.