2026/01/01 by Zhisheng Li, Jieling Xiao, Xi Yang +2 · 1 voice
Engineering · #Railway Engineering and Dynamics #Advanced Fiber Optic Sensors #Ultrasonics and Acoustic Wave Propagation
paper · doi:10.1093/iti/liag004
openalex publication_date 2026/01/01 · openalex created_date 2026/03/27 · openalex updated_date 2026/07/31
Abstract Aiming at the monitoring needs of heavy-haul railway infrastructure, this study established an off-track, non-contact monitoring system based on Dual-measuring-arm Michelson Fiber Optic Interferometric Sensing (DM-MFOIS) technology, enabling real-time acquisition of train-induced acoustic-vibration signals and baseline construction. However, systematic baselines for different track sections—such as tangent sections, curves, and bridges—using such sensing remain limited. To address this gap, the STA/LTA method was employed for automatic signal segmentation and denoising, while train positioning was achieved by analyzing spectral centroid variations, with an error range of 0.4–0.8 seconds. By applying S-transform and multi-dimensional features, the response characteristics of tangent sections, small-radius curves, and bridge sections under both heavy and light train passages were systematically analyzed. The results indicate: (i) In curved sections, the locomotive position has a significant influence, with distinct impact signals observed at characteristic points. (ii) Bridge sections exhibit intense signal responses; the RMS surges approximately six-fold for light trains and twelve-fold for heavy trains when crossing bridges, with the most pronounced impact at the track-bridge transition zone. (iii) In the case of rail emergency clamp damage, features such as energy concentration at 471 Hz, a spectral centroid valley, and a 7.6% increase in RMS were identified at the damaged location, validating the baseline’s detection capability. The established acoustic-vibration baseline can provide a basis for anomaly warning and intelligent maintenance of railway infrastructure.