2026/05/08 by Li-Mei Lin, Jie Huang, Hui Li +5 · 1 voice
Engineering · Materials Science · #Chalcogenide Semiconductor Thin Films #Perovskite Materials and Applications #Quantum Dots Synthesis And Properties
paper · pdf · doi:10.1007/s40820-026-02193-w
openalex created_date 2026/05/08 · openalex publication_date 2026/05/08 · openalex updated_date 2026/07/29
Abstract Annealing is a crucial step for recrystallizing Sb 2 S 3 and forming high-quality Sb 4 S 6 chain-like crystals, which is essential for achieving high-efficiency photovoltaic devices. However, this process currently faces a fundamental trade-off: Although high-temperature annealing enhances crystallinity, it also introduces severe sulfur and Sb 2 S 3 molecular escape, ultimately degrading device performance. To overcome this limitation, we propose a confined-space annealing (CSA) strategy that operates via a dual mechanism. Physical confinement generates a high local vapor pressure, which suppresses Sb 2 S 3 re-volatilization and enables recrystallization into large-grain films under atmospheric pressure. Controlled oxygen doping preferentially fills sulfur vacancy sites, suppresses interstitial Sb i defects, and promotes the self-assembly of Sb 2 O 3 nano-belts at grain boundaries, effectively blocking leakage paths. As a result, the CSA films exhibit a 60.9% reduction in V S defects and a 40.3% improvement in carrier collection efficiency compared to pristine films. Carbon-based devices fabricated using this approach achieve a power conversion efficiency of 7.17% ( V OC = 750 mV, J SC = 14.26 mA cm −2 , FF = 62.7%), which is the highest reported value for Sb 2 S 3 solar cells fabricated entirely in ambient atmosphere. This work not only offers a practical fabrication route under ambient conditions but also provides fundamental insights into defect passivation in chalcogenide photovoltaics.