2024/01/27 by M.E. Amosah, Margaret Amosah, M. Yvon +3
Engineering · Environmental Science · #Metal Extraction and Bioleaching #Mineral Processing and Grinding #Minerals Flotation and Separation Techniques
paper · doi:10.1016/j.mineng.2024.108581
openalex publication_date 2024/01/27 · openalex created_date 2025/10/10 · openalex updated_date 2026/07/30
Due to the depletion of high-grade mineral deposits, there is increasing demand for the reprocessing of minerals from tailings dams. However, tailings reprocessing can present several challenges due to the presence of slimes: reduced selectivity and kinetics resulting in low recovery, excessive entrainment, and high reagent consumption. This research focussed on a previously intractable problem, the processing of a low-grade cassiterite (SnO2) feed from a tailings dam. Conventional technologies have failed to achieve viable recoveries and saleable grades. Therefore, gravity separation and desliming were applied using the REFLUXTM Classifier and the REFLUXTM Graviton, targeting the tin down to ∼ 10 µm, followed by flotation. The REFLUXTM Classifier experiments were performed using an inclined channel spacing of 1.8 mm at ∼ 5 t/m2/h and higher. Recoveries of up to 94 % above 20 µm and 50 % below 20 µm were achieved. Importantly, the deslimed product permitted highly effective recovery of the tin by flotation, with final decanted product grades higher than 30 ± 2 wt% tin, and an overall recovery of up to 35 ± 5 %. Desliming with the REFLUXTM Graviton achieved recovery up to 80 %. The scope for further improvement in the grade and recovery is discussed.