2026/07/27 by Moritz Theissing, Sandra Gonzaga, Patrick Willenshofer +5
#cond-mat.mtrl-sci #physics.space-ph
Ultrafine-grained (UFG) aluminium alloys are promising lightweight structural materials for space applications, where a high grain-boundary density can act as sinks for irradiation-induced defects. Their deployment, however, is contingent on thermal stability: aluminium components in low-Earth orbit can reach ∼200 ^∘C under solar irradiation, close to where severely deformed aluminium alloys recrystallise. Accurate, bulk-representative determination of recrystallisation onset is therefore essential, yet conventional in situ transmission electron microscopy (TEM) heating is compromised by thin-film effects, ambiguous grain-boundary contrast, and small sampling volumes. Here, a UFG AA6061 (Al-Mg-Si) alloy produced by high-pressure torsion was studied by a direct comparison of in situ TEM heating and in situ electron backscatter diffraction (EBSD) heating, complemented by differential scanning calorimetry (DSC), analytical scanning transmission electron microscopy (STEM-EDX) and microhardness. In situ EBSD sampled ∼ 103 grains from bulk material and resolved the microstructural evolution into sequential recovery, recrystallisation and grain-growth regimes, placing the onset of instability at ∼198 ^∘C. Calorimetry, microhardness and nanoscale elemental mapping showed that grain refinement suppresses GP-zones formation and shifts precipitation to lower temperatures, with precipitation neither retarding recrystallisation nor restoring strength once the UFG structure is consumed. Revisiting the Brailsford-Bullough-Hayns sink-strength theory with a KAM-informed, temperature-dependent internal sink strength, we show that the grain-boundary sink strength collapses as recovery and recrystallisation proceed. We establish in situ EBSD heating as an in operando method for bulk-representative determination of microstructural instabilities in advanced metallic systems.