2002/12/01 by Michael J. Leamy, Tamer M. Wasfy
Engineering · #Gear and Bearing Dynamics Analysis #Mechanical stress and fatigue analysis #Vibration and Dynamic Analysis
paper · doi:10.1115/1.1513793
openalex publication_date 2002/12/01 · openalex created_date 2025/10/10 · openalex updated_date 2026/07/26
In this study, a dynamic finite element model is developed for pulley belt-drive systems and is employed to determine the transient and steady-state response of a prototypical belt-drive. The belt is modeled using standard truss elements, while the pulleys are modeled using rotating circular constraints, for which the driver pulley’s angular velocity is prescribed. Frictional contact between the pulleys and the belt is modeled using a penalty formulation with frictional contact governed by a Coulomb-like tri-linear friction law. One-way clutch elements are modeled using a proportional torque law supporting torque transmission in a single direction. The dynamic response of the drive is then studied by incorporating the model into an explicit finite element code, which can maintain time-accuracy for large rotations and for long simulation times. The finite element solution is validated through comparison to an exact analytical solution of a steadily-rotating, two-pulley drive. Several response quantities are compared, including the normal and tangential (friction) force distributions between the pulleys and the belt, the driven pulley angular velocity, and the belt span tensions. Excellent agreement is found. Transient response results for a second belt-drive example involving a one-way clutch are used to demonstrate the utility and flexibility of the finite element solution approach.