2023/05/24 by Taiping Zhang, Zhang, Taiping
Engineering · Physics and Astronomy · #Applied Physics (physics.app-ph) #FOS: Physical sciences #Optics (physics.optics) #Photonic Crystals and Applications #Photonic and Optical Devices
paper · pdf · doi:10.48550/arxiv.2305.15251
openalex publication_date 2023/05/24 · openalex created_date 2025/10/10 · openalex updated_date 2026/07/28
In this thesis, we propose to tackle this important issue by designing and realizing a novel nano-optical device based on the use of a photonic crystal (PC) structure to generate an efficient coupling between the external source and a NA. In this dissertation, the content is arranged into three charpters. Chapter 1 introduces the theoritical background of this research including surface plasmon and photonic crystal concepts. This chapter also shows the design of the hybrid devices and demonstrates the numerical simulation of their optical properties. Chapter 2 mainly describes the process and the fabricated samples. The nanodevices are fabricated on an InP membrane substrate. The critical technology for the fabrication is complex electron beam lithography. With this technology the alignment of the positions of PC structure and NA is well controlled. Chapter 3 demonstrates the optical characterizations of the hybrid nanodevices including far-field characterizations and near-field characterizations. The far-field measurement is performed by micro-photoluminescence spectroscopy at room temperature. The results show that for the defect PC cavities, the presence of the NA influences the optical properties of the laser, such as lasing threshold and laser wavelength. The near-field measurement is performed by near-field scanning microscopy, at room temperature also. The investigation shows that the NA modifies the optical field distribution of the laser mode. The modification depends on the position and direction of the NA and it is sensitive to the polarization of the optical field.