Determination of effective capacitance and film thickness from constant-phase-element parameters

2009/11/14 by Bryan Hirschorn, Mark E. Orazem, Bernard Tribollet +3 · 40 citations
Engineering · Environmental Science · Materials Science · #Non-Destructive Testing Techniques #Smart Materials for Construction #Anodic Oxide Films and Nanostructures

paper · doi:10.1016/j.electacta.2009.10.065

Cited by

• Corrosion behaviour of niobium in phosphate buffered saline solutions with different concentrations of bovine serum albumin
• Corrosion behavior of AZ91 Mg alloy with a heterogeneous structure produced by ECAP
• Corrosion behavior of as-cast Mg–5Sn based alloys with In additions in 3.5 wt% NaCl solution
• Roles of grain refinement in the rust formation and corrosion resistance of weathering steels
• Influence of Ru-Ni-Nb combined cathode modification on corrosion behavior and passive film characteristics of Ti-6Al-4V Alloy used for oil country tubular goods
• Electrochemical and immersion corrosion performance improvement of electrodeposited Fe–Ni coating: Effect of laser-induced periodic current on microstructure evolution
• Enhancing wear and corrosion resistance of electroless Ni-P coatings in CO2-saturated NaCl solution through polytetrafluoroethylene incorporation
• Tailoring corrosion resistance of a high-strength wire-arc additively manufactured Mg-Gd-Y alloy through precipitate engineering
• Epoxy nanocomposite coatings with enhanced dual active/barrier behavior containing graphene-based carbon hollow spheres as corrosion inhibitor nanoreservoirs
• High temperature corrosion behavior of ADC12 aluminum alloy in oxalic acid solution
• From cast to wire-arc DED: An investigation on NAB alloy MIC resistance
• Molecularly modified ultrathin Al 2 O 3 layers as proton-conductive, oxygen-impermeable nanomembranes for catalytic surfaces
• Characterization of organic light-emitting diodes using impedance spectroscopy and equivalent circuits
• Strategic PANI/silica surface functionalization of cenospheres for enhanced barrier performance in epoxy composite coatings for metals
• Novel metal-organic super-hydrophobic surface fabricated by nanosecond laser irradiation in solution
• Hybrid Coatings Enriched with Tetraethoxysilane for Corrosion Mitigation of Hot-Dip Galvanized Steel in Chloride Contaminated Simulated Concrete Pore Solutions. [europepmc]
• Development of An Impedimetric Aptasensor for the Detection of Staphylococcus aureus. [europepmc]
• Amyloid Beta Detection by Faradaic Electrochemical Impedance Spectroscopy Using Interdigitated Microelectrodes. [europepmc]
• Review of Stratum Corneum Impedance Measurement in Non-Invasive Penetration Application. [europepmc]
• Experimental and Theoretical Study on the Synergistic Inhibition Effect of Pyridine Derivatives and Sulfur-Containing Compounds on the Corrosion of Carbon Steel in CO₂-Saturated 3.5 wt.% NaCl Solution. [europepmc]
• Corrosion mechanism and kinetics of Al-Zn coating deposited by arc thermal spraying process in saline solution at prolong exposure periods. [europepmc]
• The Influence of Microstructure on the Passive Layer Chemistry and Corrosion Resistance for Some Titanium-Based Alloys. [europepmc]
• The Effect of UVB Irradiation and Oxidative Stress on the Skin Barrier-A New Method to Evaluate Sun Protection Factor Based on Electrical Impedance Spectroscopy. [europepmc]
• Reversible MOF-Based Sensors for the Electrical Detection of Iodine Gas. [europepmc]
• Corrosion Inhibition Mechanism and Efficiency Differentiation of Dihydroxybenzene Isomers Towards Aluminum Alloy 5754 in Alkaline Media. [europepmc]
• A Comprehensive Review on Water Diffusion in Polymers Focusing on the Polymer-Metal Interface Combination. [europepmc]
• Ammonium Phosphate as Inhibitor to Mitigate the Corrosion of Steel Rebar in Chloride Contaminated Concrete Pore Solution. [europepmc]
• Analysis of the Charging Current in Cyclic Voltammetry and Supercapacitor's Galvanostatic Charging Profile Based on a Constant-Phase Element. [europepmc]
• Simple circuit equivalents for the constant phase element. [europepmc]
• Interdigitated Electrode for Electrical Characterization of Commercial Pseudo-Binary Biodiesel-Diesel Blends. [europepmc]
• PbO 2 modified with TiO 2 -NTs composite materials with enhanced OER electrocatalytic activity for Zn electrowinning. [europepmc]
• Hybrid Epoxy-Alkyl Sol-Gel Coatings Reinforced with SiO 2 Nanoparticles for Corrosion Protection of Anodized AZ31B Mg Alloy. [europepmc]
• Effect of cobalt addition on the corrosion behavior of near equiatomic NiTi shape memory alloy in normal saline solution: electrochemical and XPS studies. [europepmc]
• Vitamin C-reduced graphene oxide improves the performance and stability of multimodal neural microelectrodes. [europepmc]
• Deciphering the Molecular Mechanism of Substrate-Induced Assembly of Gold Nanocube Arrays toward an Accelerated Electrocatalytic Effect Employing Heterogeneous Diffusion Field Confinement. [europepmc]
• Enhanced susceptibility of SARS-CoV-2 spike RBD protein assay targeted by cellular receptors ACE2 and CD147: Multivariate data analysis of multisine impedimetric response. [europepmc]
• Adsorption and Surface Analysis of Sodium Phosphate Corrosion Inhibitor on Carbon Steel in Simulated Concrete Pore Solution. [europepmc]
• Li 5 NCl 2 : A Fully-Reduced, Highly-Disordered Nitride-Halide Electrolyte for Solid-State Batteries with Lithium-Metal Anodes. [europepmc]
• Plant impedance spectroscopy: a review of modeling approaches and applications. [europepmc]
• How to Assess and Predict Electrical Double Layer Properties. Implications for Electrocatalysis. [europepmc]