vix.ing · top · new · best · stats · spec

Status of Higher Order Mode Beam Position Monitors in 3.9 GHz Superconducting Accelerating Cavities at FLASH

2013/05/22 by P. Zhang, N. Baboi, Zhang, P. +9
Engineering · Physics and Astronomy · #Accelerator Physics (physics.acc-ph) #FOS: Physical sciences #Magnetic confinement fusion research #Particle Accelerators and Free-Electron Lasers #Particle accelerators and beam dynamics

paper · pdf · doi:10.48550/arxiv.1305.5237

openalex publication_date 2013/05/22 · openalex created_date 2025/10/10 · openalex updated_date 2026/07/28

Abstract

Higher order mode (HOM) beam position monitors (BPM) are being developed for the 3.9 GHz third harmonic superconducting accelerating cavities at FLASH. The transverse beam position in a cavity can be determined utilizing beam-excited HOMs based on dipole components. The existing couplers used for HOM suppression provide necessary signals. The diagnostics principle is similar to a cavity BPM, but requires no additional vacuum instruments on the linac. The challenges of HOM-BPM for 3.9 GHz cavities lie in the dense HOM spectrum arising from the coupling of the majority HOMs amongst the four cavities in the cryo-module ACC39. HOMs with particularly promising diagnostics features were evaluated using a spectrum analyzer and custom-built test electronics with various data analysis techniques, data reduction was focused on. After careful theoretical and experimental assessment of the HOM spectrum, multi-cavity modes in the region of 5 GHz were chosen to provide a global position over the complete module with superior resolution (~20 um) while trapped modes in the 9 GHz region provide local position in each cavity with comparable resolution (~50 um). A similar HOM-BPM system has been planned for the European XFEL 3.9 GHz module which encompasses eight cavities. This paper reviews both the current status and the future prospects of HOM-BPMs in 3.9 GHz cavities at FLASH.

Related