2022/01/15 by Deakin, Matthew, Taylor, Phil C., Bialek, Janusz +1
#FOS: Electrical engineering #Systems and Control (eess.SY) #electronic engineering #information engineering
paper · doi:10.48550/arxiv.2201.05817
Distribution systems will require new cost-effective solutions to provide network capacity and increased flexibility to accommodate Low Carbon Technologies. To address this need, we propose the Hybrid Multi-Terminal Soft Open Point (Hybrid MT-SOP) to efficiently provide distribution system interconnection capacity. Each leg of the Hybrid MT-SOP has an AC/DC converter connected in series with a bank of AC switches (Feeder Selector Switches) to allow the converter to connect to any of the feeders at a node. Asymmetric converter sizing is shown to increase feasible power transfers by up to 50% in the three-terminal case, whilst a conic mixed-integer program is formulated to optimally select the device configuration and power transfers. A case study shows the Hybrid MT-SOP increasing utilization of the converters by more than one third, with a 13% increase in system loss reduction as compared to an equally-sized MT-SOP.