2025/06/13 by David Mazzanti, Sergi Gomez, Mazzanti, D. +41
Medicine · Physics and Astronomy · #Advanced MRI Techniques and Applications #FOS: Physical sciences #Instrumentation and Detectors (physics.ins-det) #Medical Imaging Techniques and Applications #Particle Detector Development and Performance
paper · pdf · doi:10.48550/arxiv.2506.11655
openalex publication_date 2025/06/13 · openalex created_date 2025/10/11 · openalex updated_date 2026/07/28
This work presents the 8-channel FastIC+, a low-power consumption and highly configurable multi-channel front-end ASIC with internal digitization, for the readout of photo-sensors with picosecond time resolution and intrinsic gain. This ASIC, manufactured in 65 nm CMOS technology, can readout positive or negative polarity sensors and provides a digitized measurement of the arrival time and energy of the detected events with a power consumption of 12.5 mW per channel. On-chip digitization is executed by a Time-to-Digital Converter (TDC) based on a Phase-Locked Loop (PLL) generating 16 phases at 1.28 GHz. The internal TDC introduces a jitter contribution of 31.3 ps FWHM, with minimal impact on timing measurements. When evaluating FastIC+ to readout 3×3 mm2 silicon photomultipliers (SiPMs) with a pulsed laser, we achieved a single-photon time resolution (SPTR) of (98 ± 1) ps FWHM. We also performed time-of-flight positron emission tomography (ToF-PET) experiments using scintillator crystals of different sizes and materials. With LYSO:Ce,Ca crystals of 2.8×2.8×20 mm3 we obtained a coincidence time resolution (CTR) of (130 ± 1) ps FWHM. With LGSO crystals of 2×2×3 mm3, a CTR of (85 ± 1) ps FWHM. To the best of our knowledge, this is the first time that a CTR below 100 ps using on-chip digitization is reported.