2018/01/25 by Goutam Kumar Gupta, Gupta, Goutam K, Ambesh Dixit +1
Engineering · Materials Science · #Applied Physics (physics.app-ph) #Chalcogenide Semiconductor Thin Films #Copper-based nanomaterials and applications #FOS: Physical sciences #Quantum Dots Synthesis And Properties
paper · pdf · doi:10.48550/arxiv.1801.08498
openalex publication_date 2018/01/25 · openalex created_date 2018/02/02 · openalex updated_date 2026/07/28
We simulated photovoltaic characteristics of single heterojunction solar cell with Cu2ZnSnS4 and Cu2ZnSnSe4 absorber layer numerically using one dimensional solar cell capacitance simulator (SCAPS-1D). n-CdS/ZnO double buffer layer is used for hetrostructure interfaces with the absorber layer. The cell performance is investigated against variation of different material layer properties such as thickness, carrier concentration, defect density etc. The performance is optimized first for the single junction solar cell with Mo as back contact material with work function 5 eV. A double junction CZTS/CZTSe tandem cell structure is realized keeping the same material properties as is used in the single CZTS and CZTSe solar cell simulation and considering the flat band condition at the interface. Tandem cell performance is determined after matching the current condition for top and bottom sub-cells. The CZTS/CZTSe short circuit current density is ~ 20.98 mA/cm2 for current matched 211.33 nm thick CZTS top cell in conjunction with 2000 nm bottom cell. The maximum efficiency obtained under the flat band condition at the contact is ~21.7% with open circuit voltage ~1.324 V.