2021/08/16 by Charlot, Noeloikeau, Gauthier, Daniel J., Pomerance, Andrew
#FOS: Computer and information sciences #FOS: Electrical engineering #FOS: Physical sciences #Hardware Architecture (cs.AR) #High Energy Physics - Experiment (hep-ex) #Systems and Control (eess.SY) #electronic engineering #information engineering
paper · doi:10.48550/arxiv.2109.03026
We introduce the waveform capture device (WCD), a flexible measurement system capable of recording complex digital signals on trillionth-of-a-second (ps) time scales. The WCD is implemented via modular code on an off-the-shelf field-programmable gate-array (FPGA, Intel/Altera Cyclone V), and incorporates both time-to-digital converter (TDC) and digital storage oscilloscope (DSO) functionality. The device captures a waveform by taking snapshots of a signal as it propagates down an ultra-fast transmission line known as a carry chain (CC). It is calibrated via a novel dynamic phase-shifting (DPS) method that requires substantially less data and resources than the state-of-the-art. Using DPS, we find the measurement resolution - or mean propagation delay from one CC element to the next - to be 4.91 +/- 0.04 ps (4.54 +/- 0.02 ps) for a pulse of logic high (low). Similarly, we find the single-shot precision - or mean error on the timing of the waveform - to be 29.52 ps (27.14 ps) for pulses of logic high (low). We verify these findings by reproducing commercial oscilloscope measurements of asynchronous ring-oscillators on FPGAs, finding the mean pulse width to be 0.240 +/- 0.002 ns per inverter gate. Finally, we present a careful analysis of design constraints, introduce a novel error correction algorithm, and sketch a simple extension to the analog domain. We also provide the Verilog code instantiating the our design on an FPGA in an Appendix, and make our methods available as an open-source Python library at https://github.com/Noeloikeau/fpyga.