Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements

1976/11/01 by A. Hillerborg, Arne Hillerborg, M. Modéer +3 · 42 citations
Engineering · #Structural Behavior of Reinforced Concrete #Structural Response to Dynamic Loads #Fatigue and fracture mechanics

paper · doi:10.1016/0008-8846(76)90007-7

Cited by

• Comparison of boundary and size effect models based on new developments
• Modelling fracture process zone width and length for quasi-brittle fracture of rock, concrete and ceramics
• The double-K fracture model: A state-of-the-art review
• Determination of double-K fracture parameters using semi-circular bend test specimens
• Determination of fracture toughness of concrete based on actual critical crack length: Theoretical model and experimental validation
• Using SCB specimens to quantify nonlinear fracture characteristics in concrete and rock materials
• A strain-based criterion for predicting size-dependent fracture resistance of quasi-brittle materials under mixed mode loading
• Size effects in mode II brittle fracture of rocks
• Effect of size and cohesive assumptions on the double- K fracture parameters of concrete
• Crack growth resistance curve and size effect in the fracture of cement paste
• Dynamic crack propagation based on loss of hyperbolicity and a new discontinuous enrichment
• Three‐dimensional cohesive modeling of dynamic mixed‐mode fracture
• Numerical aspects of the crack band approach
• Gamma convergence for a phase-field cohesive energy
• Behavior of Concrete-Encased CFST Members under Axial Tension
• Experimental testing and finite element analysis of polyurethane adhesive joints under Mode I loading and degradation conditions
• Numerical modelling of sandstone uniaxial compression test using a mix-mode cohesive fracture model
• Fracture investigation in starch-based foods. [europepmc]
• A review of cohesive zone modelling as an approach for numerically assessing hydrogen embrittlement of steel structures. [europepmc]
• Cutting Modeling of Hybrid CFRP/Ti Composite with Induced Damage Analysis. [europepmc]
• Influences of Cutting Speed and Material Mechanical Properties on Chip Deformation and Fracture during High-Speed Cutting of Inconel 718. [europepmc]
• Fracture Properties and Softening Curves of Steel Fiber-Reinforced Slag-Based Geopolymer Mortar and Concrete. [europepmc]
• Design of quasibrittle materials and structures to optimize strength and scaling at probability tail: an apercu. [europepmc]
• Analysis of the Versatility of Multi-Linear Softening Functions Applied in the Simulation of Fracture Behaviour of Fibre-Reinforced Cementitious Materials. [europepmc]
• An adaptive finite element model for steerable needles. [europepmc]
• Experimental Study on Basic Mechanical Properties of Basalt Fiber Reinforced Concrete. [europepmc]
• Towards understanding the influence of porosity on mechanical and fracture behaviour of quasi-brittle materials: experiments and modelling. [europepmc]
• Material Analysis of Steel Fibre Reinforced High-Strength Concrete in Terms of Flexural Behaviour. Experimental and Numerical Investigation. [europepmc]
• Fictitious Rough Crack Model (FRCM): A Smeared Crack Modelling Approach to Account for Aggregate Interlock and Mixed Mode Fracture of Plain Concrete. [europepmc]
• Finite Element Study on the Shear Capacity of Traditional Joints between Walls Made of AAC Masonry Units. [europepmc]
• A Review on Cementitious Self-Healing and the Potential of Phase-Field Methods for Modeling Crack-Closing and Fracture Recovery. [europepmc]
• Fracture Models and Effect of Fibers on Fracture Properties of Cementitious Composites-A Review. [europepmc]
• RC Structures Strengthened by an Iron-Based Shape Memory Alloy Embedded in a Shotcrete Layer-Nonlinear Finite Element Modeling. [europepmc]
• Mechanical Properties of Hardened 3D Printed Concretes and Mortars-Development of a Consistent Experimental Characterization Strategy. [europepmc]
• Mechanical and Fracture Parameters of Ultra-High Performance Fiber Reinforcement Concrete Cured via Steam and Water: Optimization of Binder Content. [europepmc]
• A Numerical Study on 3D Printed Cementitious Composites Mixes Subjected to Axial Compression. [europepmc]
• Finite Element Investigation on Cutting Force and Residual Stress in 3D Elliptical Vibration Cutting Ti6Al4V. [europepmc]
• High strength and damage-tolerance in echinoderm stereom as a natural bicontinuous ceramic cellular solid. [europepmc]
• Numerical Simulations of the Low-Velocity Impact Response of Semicylindrical Woven Composite Shells. [europepmc]
• Physics-assisted machine learning methods for predicting the splitting tensile strength of recycled aggregate concrete. [europepmc]
• Fracture Toughness and Fatigue Crack Growth Analyses on a Biomedical Ti-27Nb Alloy under Constant Amplitude Loading Using Extended Finite Element Modelling. [europepmc]
• Voids Development in Metals: Numerical Modelling. [europepmc]