Hardened properties of 3D printed concrete: The influence of process parameters on interlayer adhesion

2019/03/08 by R.J.M. Wolfs, Rob Wolfs, F.P. Bos +2 · 32 citations
Engineering · Earth and Planetary Sciences · #Innovations in Concrete and Construction Materials #Additive Manufacturing and 3D Printing Technologies #Building materials and conservation

paper · doi:10.1016/j.cemconres.2019.02.017

Citations

• Early age mechanical behaviour of 3D printed concrete: Numerical modelling and experimental testing
• 3D printing using concrete extrusion: A roadmap for research

Cited by

• Improving printability of limestone-calcined clay-based cementitious materials by using viscosity-modifying admixture
• Numerical simulations of concrete processing: From standard formative casting to additive manufacturing
• Filament geometry control in extrusion-based additive manufacturing of concrete: The good, the bad and the ugly
• Peridynamic anisotropic behavior analysis of 3D-printed concrete structures
• Analysis and design of 3D printed reinforced concrete walls under in-plane quasi-static loading
• Experimental and analytical assessment of the in-plane behaviour of 3D printed concrete walls subjected to cyclic loads
• 3D-printable aerogel-incorporated concrete: Anisotropy influence on physical, mechanical, and thermal insulation properties
• The Effect of Material Fresh Properties and Process Parameters on Buildability and Interlayer Adhesion of 3D Printed Concrete. [europepmc]
• Microstructural Characterization of 3D Printed Cementitious Materials. [europepmc]
• The Effect of Accelerator Dosage on Fresh Concrete Properties and on Interlayer Strength in Shotcrete 3D Printing. [europepmc]
• Mechanical Behavior of Printed Strain Hardening Cementitious Composites. [europepmc]
• Effect of 3D Printed Spatial Reinforcement on Flexural Characteristics of Conventional Mortar. [europepmc]
• Buildability and Mechanical Properties of 3D Printed Concrete. [europepmc]
• Effect of Structural Build-Up on Interlayer Bond Strength of 3D Printed Cement Mortars. [europepmc]
• Mechanical Properties of Hardened 3D Printed Concretes and Mortars-Development of a Consistent Experimental Characterization Strategy. [europepmc]
• 3D Concrete Printing: A Systematic Review of Rheology, Mix Designs, Mechanical, Microstructural, and Durability Characteristics. [europepmc]
• Dynamic Properties and Fractal Characteristics of 3D Printed Cement Mortar in SHPB Test. [europepmc]
• Comparison of Properties of 3D-Printed Mortar in Air vs. Underwater. [europepmc]
• A Numerical Study on 3D Printed Cementitious Composites Mixes Subjected to Axial Compression. [europepmc]
• Experimental Study of Hardened Young's Modulus for 3D Printed Mortar. [europepmc]
• Properties of 3D-Printed Polymer Fiber-Reinforced Mortars: A Review. [europepmc]
• 3D Printing of Concrete-Geopolymer Hybrids. [europepmc]
• Interlayer Bond Strength Testing in 3D-Printed Mineral Materials for Construction Applications. [europepmc]
• Properties of 3D Printed Concrete-Geopolymer Hybrids Reinforced with Aramid Roving. [europepmc]
• Properties of 3D Printing Fiber-Reinforced Geopolymers Based on Interlayer Bonding and Anisotropy. [europepmc]
• A Review of the Extruder System Design for Large-Scale Extrusion-Based 3D Concrete Printing. [europepmc]
• Anisotropy in Additively Manufactured Concrete Specimens under Compressive Loading-Quantification of the Effects of Layer Height and Fiber Reinforcement. [europepmc]
• Experimental Study on Interfacial Shear Behavior of 3D Printed Recycled Mortar. [europepmc]
• Testing Mortars for 3D Printing: Correlation with Rheological Behavior. [europepmc]
• Optimization of 3D Printing Nozzle Structure and the Influence of Process Parameters on the Forming Performance of Underwater Concrete. [europepmc]
• Anisotropy of Mechanical Properties of 3D-Printed Materials-Influence of Application Time of Subsequent Layers. [europepmc]
• Embedment of 3D Printed Self-Sensing Composites for Smart Cementitious Components. [europepmc]