The origins of thixotropy of fresh cement pastes

2011/10/17 by Nicolas Roussel, N. Roussel, G. Ovarlez +5 · 32 citations
Engineering · Materials Science · #Innovations in Concrete and Construction Materials #Calcium Carbonate Crystallization and Inhibition #Concrete and Cement Materials Research

paper · doi:10.1016/j.cemconres.2011.09.004

Cited by

• Rheological requirements for printable concretes
• Early age mechanical behaviour of 3D printed concrete: Numerical modelling and experimental testing
• Extrusion-based additive manufacturing with cement-based materials – Production steps, processes, and their underlying physics: A review
• Improving printability of limestone-calcined clay-based cementitious materials by using viscosity-modifying admixture
• Numerical simulations of concrete processing: From standard formative casting to additive manufacturing
• Rheology of cement grouts: On the critical shear rate and no-slip regime in the Couette geometry
• Contact point geometry governs structural build-up at rest in Portland cement-limestone blends
• Lime as an Anti-Plasticizer for Self-Compacting Clay Concrete. [europepmc]
• Preparation, Characterization and Performances of Powdered Polycarboxylate Superplasticizer with Bulk Polymerization. [europepmc]
• Relating Ettringite Formation and Rheological Changes during the Initial Cement Hydration: A Comparative Study Applying XRD Analysis, Rheological Measurements and Modeling. [europepmc]
• Investigation of the Incompatibilities of Cement and Superplasticizers and Their Influence on the Rheological Behavior. [europepmc]
• Nailing of Layers: A Promising Way to Reinforce Concrete 3D Printing Structures. [europepmc]
• The Influences of Cement Hydration and Temperature on the Thixotropy of Cement Paste. [europepmc]
• Modeling SAOS Yield Stress of Cement Suspensions: Microstructure-Based Computational Approach. [europepmc]
• Mechanical Properties of Hardened 3D Printed Concretes and Mortars-Development of a Consistent Experimental Characterization Strategy. [europepmc]
• Influence of the Precursor, Molarity and Temperature on the Rheology and Structural Buildup of Alkali-Activated Materials. [europepmc]
• A Fresh View on Limestone Calcined Clay Cement (LC 3 ) Pastes. [europepmc]
• Effect of Ornamental Stone Waste Incorporation on the Rheology, Hydration, Microstructure, and CO 2 Emissions of Ordinary Portland Cement. [europepmc]
• Experimental Investigation of Synchronous Grouting Material Prepared with Different Mineral Admixtures. [europepmc]
• Effect of TiO 2 Nanoparticles on the Fresh Performance of 3D-Printed Cementitious Materials. [europepmc]
• Evaluation of CNTs and SiC Whiskers Effect on the Rheology and Mechanical Performance of Metakaolin-Based Geopolymers. [europepmc]
• Rheological Characterization and Accumulation Tests for Strong Thixotropic Engineering Slurry. [europepmc]
• Printability, Thermal and Compressive Strength Properties of Cementitious Materials: A Comparative Study with Silica Fume and Limestone. [europepmc]
• Advances in Organic Rheology-Modifiers (Chemical Admixtures) and Their Effects on the Rheological Properties of Cement-Based Materials. [europepmc]
• Optimisation of Mix Proportion of 3D Printable Mortar Based on Rheological Properties and Material Strength Using Factorial Design of Experiment. [europepmc]
• Study on the Effect of Foam Stability on the Properties of Foamed Lightweight Soils. [europepmc]
• Geometric Conformability of 3D Concrete Printing Mixtures from a Rheological Perspective. [europepmc]
• The Role of MWCNTs in Enhancing the Foam Stability and Rheological Behavior of Cement Pastes That Contain Air-Entraining and Superplasticizer Admixtures. [europepmc]
• Analysis of the Rheological Properties of Natural Hydraulic Lime-Based Suspensions for Sustainable Construction and Heritage Conservation. [europepmc]
• A 3D Printing Platform for Design and Manufacturing of Multi-Functional Cementitious Construction Components and Its Validation for a Post-Tensioned Beam. [europepmc]
• Understanding the Colloidal and Hydration Control in Rheological Evolution of 3D Printed MgO-SiO 2 -K 2 HPO 4 Gel System. [europepmc]
• Cellulose nanofibers and limestone filler enable high-performance, sustainable, and cost-efficient printable concrete. [europepmc]