2022/02/22 by C.D.R. Azevedo, Azevedo, C. D. R., Baeza, A. +16
Energy · Environmental Science · Health Professions · #Advanced Energy Technologies and Civil Engineering Innovations #FOS: Physical sciences #Instrumentation and Detectors (physics.ins-det) #Radioactive contamination and transfer #Radioactivity and Radon Measurements
paper · pdf · doi:10.48550/arxiv.2202.11068
openalex publication_date 2022/02/22 · openalex created_date 2025/10/10 · openalex updated_date 2026/07/28
In this paper, we report the development and performance of a detector module envisaging a tritium-in-water real-time activity monitor. The monitor is based on modular detection units whose number can be chosen according to the required sensitivity. The full system is being designed to achieve a Minimum Detectable Activity (MDA) of 100 Bq/L of tritium-in-water activity which is the limit established by the E.U. Council Directive 2013/51/Euratom for water intended for human consumption. The same system can be used as a real-time pre-alert system for nuclear power plant regarding tritium-in water environmental surveillance. The first detector module was characterized, commissioned and installed immediately after the discharge channel of the Arrocampo dam (Almaraz nuclear power plant, Spain) on the Tagus river. Due to the high sensitivity of the single detection modules, the system requires radioactive background mitigation techniques through the use of active and passive shielding. We have extrapolated a MDA of 3.6 kBq/L for a single module being this value limited by the cosmic background. The obtained value for a single module is already compatible with a real-time environmental surveillance and pre-alert system. Further optimization of the single-module sensitivity will imply the reduction of the number of modules and the cost of the detector system.