2025/05/17 by Kamil, Barakat Abdul-Fattah, Hadi Hussain, Dhia
#Electrochemical Application and Dye-Sensitized Solar Cell (DSSC) #FESEM #Graphene Oxide #Nanocomposite Aerogel #Nanocurcumin
paper · doi:10.57647/j.ijnd.2025.1604.29
In this study, nanocomposite GO/ZnO/Al2O3 aerogels with different GO ratios (10, 30, and 50 %) were effectively prepared using a hydrothermal method and a modified Hummers method to prepare GOES. ZnO and Al2O3 NPs were synthesized from curcumin extract using a green synthesis method. Raman, XRD, EDX, FESEM and UV-Vis. Spectra were used to characterize the synthesized nanomaterials. The bandgap energies of GO, ZnO, Al2O3, and their nanocomposites were calculated from their UV spectra. The interaction between the components of the nanocomposite graphene oxide, zinc oxide and aluminum oxide give the nanocomposite photochemical importance owing to the large surface area of the components, especially graphene oxide and zinc oxide, and the high electrical and thermal conductivities of the molecule. Improved electrochemical properties were achieved by fabricating dye-sensitized solar cells, composed of nano curcumin and methylene blue as sensitizers, GO/ZnO/Al2O3 nanocomposite aerogel as a photoanode to obtain a highly efficient cell at the lowest cost and copper as the counter electrode. The DSSC achieves the best performance at 0.36% and 50% GO content when methylene blue is used as a sensitizer to accelerate the excitation of electrons and generate current and voltage. The primary objective of this study is to develop dye-sensitized solar cells with maximum efficiency at minimum cost.