2022/02/06 by V. A. U. De Alwis, De Alwis, V. A. U., P. H. T. D. Weerarathne +3
Engineering · Environmental Science · #FOS: Physical sciences #Fluid Dynamics (physics.flu-dyn) #Fluid Dynamics and Vibration Analysis #Seismic and Structural Analysis of Tall Buildings #Wind and Air Flow Studies
paper · pdf · doi:10.48550/arxiv.2202.02795
openalex publication_date 2022/02/06 · openalex created_date 2022/04/03 · openalex updated_date 2026/07/28
The study focuses on the wind loads acting on the standard Commonwealth Advisory Aeronautical Council (CAARC) building model. Numerical modeling has been used instead of employing wind tunnel experiments due to the requirement of high physical space. This is mainly due to the superiority of CFD codes included in turbulence models such as RANS and more precise LES. However, the shortcoming arising through basing the result on numerical investigations is compensated by direct comparison to experimental data available in literature. The study extends beyond the typical rigid building structure giving account to the minor deformations resulting from the impact of the wind force on an aeroelastic structure through coupled two-way fluid structure interaction, while designing the building to have its natural fundamental frequency of 0.2 Hz. An improved Smagorinsky-Lily model was used for all LES models and the results were compared with available wind tunnel experimental data. It was found that coupled LES analysis provided better correlation to wind tunnel data compared to rigid fluid domains with respect to pressure distribution and wake formation despite the additional computation time taken. However, all these readings were dependent on the boundary conditions which needs to be estimated concisely fur future use.