2023/09/13 by S. Elschner, A. Kudymow, Elschner, Steffen +5
Engineering · Physics and Astronomy · #FOS: Physical sciences #HVDC Systems and Fault Protection #Physics of Superconductivity and Magnetism #Superconducting Materials and Applications #Superconductivity (cond-mat.supr-con)
paper · pdf · doi:10.48550/arxiv.2309.07292
openalex publication_date 2023/09/13 · openalex created_date 2023/09/16 · openalex updated_date 2026/07/28
Conductors made of high-temperature (HTS) wires helically wound in one or more layers on round tubes (CORT) are compact, flexible, and can carry a large amount of current. Although these conductors were initially developed for DC applications, e.g. in magnets, it is worth considering their use for AC, e.g. in underground cables for medium voltage grids and with currents in the kA-range. In these cases, the major challenge is reducing AC losses. In contrast to a straight superconducting wire, in a helical arrangement, due to superconducting shielding, the current does not follow the direction of the wires, but takes a non-trivial zig-zag path within the individual HTS wires (Garber pattern). This includes current components across the thickness of the superconducting layers, so that the often used thin-shell approximation does not hold. In this contribution, we studied a one-layer three-wire CORT by means of fully three-dimensional simulations, based on the H-formulation of Maxwell's equations implemented in the commercial software package COMSOL Multiphysics. As a result of our simulations, the peculiar current profiles were confirmed. In addition, the influence of current, pitch angle, and frequency on the AC losses was studied. We found an optimum for the pitch angle and that the current profiles strongly depend on frequency.