2023/07/27 by Meiyun Han, Han, Meiyun, Tianhao Wei +11
Engineering · #Accelerator Physics (physics.acc-ph) #FOS: Physical sciences #Particle Accelerators and Free-Electron Lasers #Particle accelerators and beam dynamics #Superconducting Materials and Applications
paper · pdf · doi:10.48550/arxiv.2307.14644
openalex publication_date 2023/07/27 · openalex created_date 2025/10/10 · openalex updated_date 2026/07/28
Based on the design requirements proposed by the Beijing On-Line Isotope Separation project (BISOL), four Sn22+-based,81.25MHz continuous wave (CW) drift tube linac (DTL) cavities have been designed. These DTLs are capable of accelerating Sn22+ of 0.1 pmA from 0.5 MeV/u to 1.8 MeV/u over a length of 7 m, with an output longitudinal normalized RMS emittance of 0.35π⋅ mm⋅mrad, and transmission efficiency higher than 95%. The dynamics design adopted the KONUS (Kombinierte Null Grad Struktur Combined 0^∘ Structure) scheme. Comprehensive error study implies that these DTLs can accommodate a wide range of non-ideal beams and cavity alignment errors while maintaining high transmission efficiency. The electromagnetic design employed a Cross-bar H-mode (CH) structure for superior water-cooling characteristics, and a detailed tuning analysis was conducted to derive an optimal tuning scheme. The results of the multiple-physics analysis indicate that the frequency shift of each cavity is within an acceptable range. Comparing the dynamics requirements with the RF design results, similar particle output phase distribution, equivalent energy gain and consistent emittance growth are observed. Detailed designs will be presented in this manuscript.