Kinetics of flow and strain-hardening

1981/11/01 by H. Mecking, U.F. Kocks · 36 citations
Materials Science · Physics and Astronomy · Chemical Engineering · #Microstructure and mechanical properties #Theoretical and Computational Physics #Rheology and Fluid Dynamics Studies

paper · doi:10.1016/0001-6160(81)90112-7

Citations

• The plasticity of pure single crystals

Cited by

• Incorporation of Physics‐Based Strengthening Coefficients into Phenomenological Crystal Plasticity Models
• Cooperative deformation mechanisms in a fatigued CoCrNi multi-principal element alloy: A case of low stacking fault energy
• Modeling and simulation of dynamic recrystallization behavior for 42CrMo steel by an extended cellular automaton method
• Physics and phenomenology of strain hardening: the FCC case
• Electric current–assisted deformation behavior of Al-Mg-Si alloy under uniaxial tension
• Molecular Dynamics Study of Irradiation-Induced Defect and Dislocation Evolution in Strained Nickel
• Non-linear jog-dragging effect on the mobility law of edge dislocations in face-centered cubic nickel
• Stable crack propagation in dislocation-engineered oxide visualized by double cleavage drilled compression test
• Strain rate dependence of compressive behavior in an Al-Zn-Mg alloy processed by ECAP
• A review of dynamic recrystallization phenomena in metallic materials
• A one-parameter approach to determining the critical conditions for the initiation of dynamic recrystallization
• The Influence of Lath, Block and Prior Austenite Grain (PAG) Size on the Tensile, Creep and Fatigue Properties of Novel Maraging Steel. [europepmc]
• Stress-Strain Curves and Modified Material Constitutive Model for Ti-6Al-4V over the Wide Ranges of Strain Rate and Temperature. [europepmc]
• Dislocation Based Flow Stress Model of 300M Steel in Isothermal Compression Process. [europepmc]
• Microstructure Evolution in a 6082 Aluminium Alloy during Thermomechanical Treatment. [europepmc]
• Crystal Plasticity Modeling of Anisotropic Hardening and Texture Due to Dislocation Transmutation in Twinning. [europepmc]
• Effect of High-Pressure Torsion on Structure and Properties of Ti-15Mo/TiB Metal-Matrix Composite. [europepmc]
• Studying Grain Boundary Strengthening by Dislocation-Based Strain Gradient Crystal Plasticity Coupled with a Multi-Phase-Field Model. [europepmc]
• Simulation of Ti-6Al-4V Additive Manufacturing Using Coupled Physically Based Flow Stress and Metallurgical Model. [europepmc]
• A Computational Framework for Material Design. [europepmc]
• Influence of Ti on the Tensile Properties of the High-Strength Powder Metallurgy High Entropy Alloys. [europepmc]
• Improved Predictability of Microstructure Evolution during Hot Deformation of Titanium Alloys. [europepmc]
• A correlation between grain boundary character and deformation twin nucleation mechanism in coarse-grained high-Mn austenitic steel. [europepmc]
• Multi-Scale Modeling of Microstructure Evolution during Multi-Pass Hot-Rolling and Cooling Process. [europepmc]
• Temperature-Dependent Superplasticity and Strengthening in CoNiCrFeMn High Entropy Alloy Nanowires Using Atomistic Simulations. [europepmc]
• Microstructure Evolution and a Unified Constitutive Model of Ti-55511 Alloy Compressed at Stepped Strain Rates. [europepmc]
• Physical and Numerical Simulations for Predicting Distribution of Microstructural Features during Thermomechanical Processing of Steels. [europepmc]
• Tempforming Strengthening of a Low-Alloy Steel. [europepmc]
• Regularities of Microstructure Evolution in a Cu-Cr-Zr Alloy during Severe Plastic Deformation. [europepmc]
• Research on the Springback Behavior of 316LN Stainless Steel in Micro-Scale Bending Processes. [europepmc]
• A micromechanical study on the effects of precipitation on the mechanical properties of CoCrFeMnNi high entropy alloys with various annealing temperatures. [europepmc]
• Experiment and Modelling of the Pre-Strain Effect on the Creep Behaviour of P/M Ni-Based Superalloy FGH96. [europepmc]
• Metals strengthen with increasing temperature at extreme strain rates. [europepmc]
• The Effect of Cyclic Heat Treatment on the Microstructure and Mechanical Properties of 18CrNiMo7-6 Gear Steel. [europepmc]
• The Low-Cycle Fatigue Behavior of a High-Strength Low-Alloy Steel Subjected to Tempforming. [europepmc]
• Sustainable Materials for Energy. [europepmc]