Analysis of the cup-cone fracture in a round tensile bar

1984/01/01 by V. Tvergaard, Viggo Tvergaard, A. Needleman · 39 citations
Engineering · Materials Science · #Metal Forming Simulation Techniques #High-Velocity Impact and Material Behavior #Fatigue and fracture mechanics

paper · doi:10.1016/0001-6160(84)90213-x

Cited by

• Simulation of metal forming – Visualization of invisible phenomena in the digital era
• A phase-field formulation for fracture in ductile materials: Finite deformation balance law derivation, plastic degradation, and stress triaxiality effects
• Effect of non-uniform void distributions on the yielding of metals
• Ductile fracture of dual-phase steel sheets under bending
• Stress-state-dependence of damage strain rate tensors caused by growth and coalescence of micro-defects
• Material point method simulations of fragmenting cylinders
• New ductile fracture model for fracture prediction ranging from negative to high stress triaxiality
• Micromechanical modelling of the elastoplasticity and damage in ductile metals
• A Meshing Framework for Digital Twins for Extrusion based Additive Manufacturing
• Validation of the material point method and plasticity with Taylor\n impact tests
• Experiments and modeling of anisotropic aluminum extrusions under multi-axial loading – Part II: Ductile fracture
• Micro-mechanical studies on the effect of the stress triaxiality and the Lode parameter on ductile damage
• An assessment of isotropic constitutive models for ductile fracture under high and low stress triaxiality
• A Nonlocal Damage-enhanced Lattice Particle Model for Ductile Fracture Analysis
• Damage Evolution in Complex-Phase and Dual-Phase Steels during Edge Stretching. [europepmc]
• Optimal stress and deformation partition in gradient materials for better strength and tensile ductility: A numerical investigation. [europepmc]
• Experimental and Computational Study of Ductile Fracture in Small Punch Tests. [europepmc]
• Simulation of Intergranular Ductile Cracking in β Titanium Alloys Based on a Micro-Mechanical Damage Model. [europepmc]
• Random distributions of initial porosity trigger regular necking patterns at high strain rates. [europepmc]
• Two-Scale Tomography Based Finite Element Modeling of Plasticity and Damage in Aluminum Foams. [europepmc]
• Plastic flow anisotropy drives shear fracture. [europepmc]
• Forming Limit Stress Diagram Prediction of Pure Titanium Sheet Based on GTN Model. [europepmc]
• Fracture Mechanisms of S355 Steel-Experimental Research, FEM Simulation and SEM Observation. [europepmc]
• Rotational Compression of Cylindrical Specimen as a New Calibrating Test for Damage Criteria. [europepmc]
• Effect of Pressure and Temperature on Densification in Electric Field-Assisted Sintering of Inconel 718 Superalloy. [europepmc]
• Impact of PP Impurities on ABS Tensile Properties: Computational Mechanical Modelling Aspects. [europepmc]
• On Characteristics of Ferritic Steel Determined during the Uniaxial Tensile Test. [europepmc]
• Some Microstructural Aspects of Ductile Fracture of Metals. [europepmc]
• A Novel Flow Model of Strain Hardening and Softening for Use in Tensile Testing of a Cylindrical Specimen at Room Temperature. [europepmc]
• Thermodynamics and Analysis of Predicted Responses of a Phase Field Model for Ductile Fracture. [europepmc]
• A high-fidelity simulation of double-sided incremental forming: Improving the accuracy by incorporating the effects of machine compliance. [europepmc]
• Development of VUMAT and VUHARD Subroutines for Simulating the Dynamic Mechanical Properties of Additively Manufactured Parts. [europepmc]
• Stress Triaxiality in Anisotropic Metal Sheets-Definition and Experimental Acquisition for Numerical Damage Prediction. [europepmc]
• Identification of microstructures critically affecting material properties using machine learning framework based on metallurgists' thinking process. [europepmc]
• Void-Induced Ductile Fracture of Metals: Experimental Observations. [europepmc]
• Hierarchically guided in situ nanolaminography for the visualisation of damage nucleation in alloy sheets. [europepmc]
• Multi-Mode Damage and Fracture Mechanisms of Thin-Walled Tubular Parts with Cross Inner Ribs Manufactured via Flow Forming. [europepmc]
• Use of Cohesive Approaches for Modelling Critical States in Fibre-Reinforced Structural Materials. [europepmc]
• The Effect of Evolving Damage on the Finite Strain Response of Inelastic and Viscoelastic Composites [europepmc]