2019/04/14 by Yuehan Yao, Yao, Yuehan, Emma Feldman +3
Engineering · Materials Science · #Adhesion, Friction, and Surface Interactions #Applied Physics (physics.app-ph) #FOS: Physical sciences #Icing and De-icing Technologies #Surface Modification and Superhydrophobicity
paper · pdf · doi:10.48550/arxiv.1904.06621
openalex publication_date 2019/04/14 · openalex created_date 2025/10/10 · openalex updated_date 2026/07/28
Numerous studies have focused on a low surface energy coating and a micro/nanoscale surface texture to design functional surfaces that delay frost formation and reduce ice adhesion. However, the scientific challenges for in developing icephobic surfaces have not been fully addressed because of degradation such as mechanical wearing. Inspired by the suppressed frost formation on concave regions of natural leaves, here we report findings on the frosting process on hydrophobic surfaces with various serrated structures. Dropwise condensation, the first stage of frosting, is enhanced on the peaks and suppressed in the valleys when the serrated surface is exposed to humid air, causing frosting to initiate from the peak. The condensed droplets in the valley are then evaporated due to the different equilibrium vapor pressure of ice and water, resulting in a non-frost band on both hydrophobic and superhydrophilic surfaces. The frost growth is systematically studied by employing various levels of ambient humidity, surface wettability, and surface geometry. Numerical simulations show the critical role of diffusion of water vapor in the formation of the discontinuous frost pattern.