Electrical Energy Storage for the Grid: A Battery of Choices
2011/11/17 by Bruce Dunn, Haresh Kamath, Jean-Marie Tarascon +1 · 88 citations
Engineering · #Advanced battery technologies research #Advanced Battery Materials and Technologies #Advanced Battery Technologies Research
paper · doi:10.1126/science.1212741
Abstract
The increasing interest in energy storage for the grid can be attributed to multiple factors, including the capital costs of managing peak demands, the investments needed for grid reliability, and the integration of renewable energy sources. Although existing energy storage is dominated by pumped hydroelectric, there is the recognition that battery systems can offer a number of high-value opportunities, provided that lower costs can be obtained. The battery systems reviewed here include sodium-sulfur batteries that are commercially available for grid applications, redox-flow batteries that offer low cost, and lithium-ion batteries whose development for commercial electronics and electric vehicles is being applied to grid storage.
Cited by
- Amorphous TiS3/S/C Composite Positive Electrodes with High Capacity for Rechargeable Lithium Batteries
- Precision pore engineering of graphite felt via ultrafast non-equilibrium Joule heating for vanadium redox flow batteries
- Regulation of Micropore Structure in Hard Carbon via Metal-Ion Coordination Strategy for Fast Sodium Storage
- Synthesis and Electrode Performance of O3-Type NaFeO2-NaNi1/2Mn1/2O2Solid Solution for Rechargeable Sodium Batteries
- State-of-health (SOH) evaluation on lithium-ion battery by simulating the voltage relaxation curves
- Metal-organic framework-based materials for hybrid supercapacitor application
- Active Materials for Aqueous Zinc Ion Batteries: Synthesis, Crystal Structure, Morphology, and Electrochemistry
- Sodium Metal Anodes: Emerging Solutions to Dendrite Growth
- Adsorbents for lithium extraction from salt lake brine with high magnesium/lithium ratio: From structure-performance relationship to industrial applications
- Toward quantifying capacity losses due to solid electrolyte interphase evolution in silicon thin film batteries
- Oxygen vacancy-rich Fe3O4 nanoparticle synthesized via facile electrochemical method as anode material for high-performance lithium-ion batteries
- Protons intercalation induced hydrogen bond network in δ-MnO2 cathode for high-performance aqueous zinc-ion batteries
- Grid-Connected Energy Storage Systems: State-of-the-Art and Emerging Technologies
- Heteroatom-doped hierarchically porous carbons derived from cucumber stem as high-performance anodes for sodium-ion batteries
- Progress of Organic Electrodes in Aqueous Electrolyte for Energy Storage and Conversion
- Lithium-Ion Battery Degradation Indicators Via Incremental Capacity Analysis
- Degradation Behavior of Lithium-Ion Batteries Based on Lifetime Models and Field Measured Frequency Regulation Mission Profile
- Scalable Planning for Energy Storage in Energy and Reserve Markets
- Improved ionic conductivity in NASICON-type Sr2+ doped LiZr2(PO4)3
- A comprehensive state‐of‐the‐art review of electrochemical battery storage systems for power grids
- Investigations on the self-discharge process in vanadium flow battery
- Understanding the benefits of Al3+-doping on NaSICONs explained through an out-of-the-scheme isovalent substitution of Fe3+ in Na3Fe2(PO4)3 series
- Regioisomeric Engineering for Multicharge and Spin Stabilization in Two-Electron Organic Catholytes
- Surface and Interface Issues in Spinel LiNi0.5Mn1.5O4: Insights into a Potential Cathode Material for High Energy Density Lithium Ion Batteries
- Theoretical Design of Solid Electrolytes with Superb Ionic Conductivity: Alloying Effect on Li+ Transportation in Cubic Li6PA5X Chalcogenides
- Supramolecular self-assembly in solid-state lithium batteries: Bulk electrolyte design and interface engineering
- Energy balancing using charge/discharge storages control and load forecasts in a renewable-energy-based grids
- Lattice oxygen redox chemistry in solid-state electrocatalysts for water oxidation
- Rechargeable Batteries for Grid Scale Energy Storage
- A review of lithium-ion battery safety concerns: The issues, strategies, and testing standards
- Zirconium-based metal–organic frameworks for electrochemical energy storage
- Polyacrylic acid assisted synthesis of free-standing MnO 2 /CNTs cathode for Zinc-ion batteries
- Energy storage systems: a review
- Regulation Engineering of Alkali Metal Interlayer Pillar in P2-Type Cathode for Ultra-High Rate and Long-Term Cycling Sodium-Ion Batteries
- Multipoint Anionic Bridge: Asymmetric Solvation Structure Improves the Stability of Lithium‐Ion Batteries
- Ferroelectric-enhanced batteries for rapid charging and improved long-term performance
- Price and capacity competition in balancing markets with energy storage
- Hydrated Network Interphase with Dynamic Negatively Charged Microregion Enables Ultra-Stable Aqueous Zinc-Ion Batteries
- Multifunctional Conductive and Elastic Matrices-Engineered Si Nanocomposite Anodes for Liquid and Solid-State Lithium Batteries
- Hypercrosslinked Phenothiazine Polymer as a Low-Cost and Durable Organic Cathode for Rechargeable Lithium Batteries
- Bioinspired Self-Assembly-Reinforced Ion Transport and Interface Regulation Enables Sustainable Metal-Ion Batteries for Wearable Electronics
- Creation of an Artificial Layer for Boosting Zn2+ Mass Transfer and Anode Stability in Aqueous Zinc Metal Batteries
- Self-Assembled Ordered Nanostructure of Zwitterionic Co-Solutes Induces Localized High-Concentration Electrolytes for Ultrastable and Efficient Zinc Metal Anodes
- Probing Electrode–Electrolyte Synergy and Bottleneck Breakthrough of Zinc-Ion Capacitors from Two Key Configurations
- Baseload electricity and hydrogen supply based on hybrid PV-wind power plants
- From anti-perovskite to double anti-perovskite: lattice chemistry basis for super-fast transportation of Li+ ions in cubic solid lithium halogen-chalcogenides
- Effect of Voltage Source Converters with Electrochemical Storage Systems on Dynamics of Reduced-inertia Bulk Power Grids
- Factoring the Cycle Aging Cost of Batteries Participating in Electricity Markets
- The success story of graphite as a lithium-ion anode material – fundamentals, remaining challenges, and recent developments including silicon (oxide) composites
- Bulk COFs and COF nanosheets for electrochemical energy storage and conversion
- Composite NASICON (Na3Zr2Si2PO12) Solid-State Electrolyte with Enhanced Na+ Ionic Conductivity: Effect of Liquid Phase Sintering
- The 2021 battery technology roadmap
- Reinforcement effect of carbon nanofibers on silicon–carbon anode materials: a review
- Surface Engineering of Ti3C2Tx MXenes via Silanol Functionalization for Improved Electrochemical Performance
- A reflection on lithium-ion battery cathode chemistry
- A Convex Cycle-based Degradation Model for Battery Energy Storage Planning and Operation
- A comprehensive review of layered transition metal oxide cathodes for sodium-ion batteries: The latest advancements and future perspectives
- Enhanced electrochemical properties of NASICON-type Na3Zr2Si2PO12 solid electrolytes with Tb3+-ions-assisted sintering
- Energy Storage System Sizing for Peak Hour Utility Applications
- Lithium extractivism and water injustices in the Salar de Atacama, Chile: The colonial shadow of green electromobility
- Corner-Sharing PS4-BS4 Modes Facilitate Fast Ion Conduction in Lithium Thioborophosphate Iodide Glassy Solid Electrolytes
- Strong synergetic electrochemistry between transition metals of α phase Ni−Co−Mn hydroxide contributed superior performance for hybrid supercapacitors
- Multi-scale thermal stability study of commercial lithium-ion batteries as a function of cathode chemistry and state-of-charge
- Superior Charge Storage and Power Density of a Conducting Polymer-Modified Covalent Organic Framework. [europepmc]
- High-capacity aqueous zinc batteries using sustainable quinone electrodes. [europepmc]
- Aqueous rechargeable zinc/sodium vanadate batteries with enhanced performance from simultaneous insertion of dual carriers. [europepmc]
- Highly nitrogen doped carbon nanofibers with superior rate capability and cyclability for potassium ion batteries. [europepmc]
- A room-temperature sodium-sulfur battery with high capacity and stable cycling performance. [europepmc]
- Atomic cobalt as an efficient electrocatalyst in sulfur cathodes for superior room-temperature sodium-sulfur batteries. [europepmc]
- Electrochemically activated spinel manganese oxide for rechargeable aqueous aluminum battery. [europepmc]
- Lithium anode stable in air for low-cost fabrication of a dendrite-free lithium battery. [europepmc]
- Solar-driven, highly sustained splitting of seawater into hydrogen and oxygen fuels. [europepmc]
- Electrospinning and Electrospun Nanofibers: Methods, Materials, and Applications. [europepmc]
- NASICON-type air-stable and all-climate cathode for sodium-ion batteries with low cost and high-power density. [europepmc]
- Approaching high-performance potassium-ion batteries via advanced design strategies and engineering. [europepmc]
- Conductive 2D metal-organic framework for high-performance cathodes in aqueous rechargeable zinc batteries. [europepmc]
- Mechanical rolling formation of interpenetrated lithium metal/lithium tin alloy foil for ultrahigh-rate battery anode. [europepmc]
- Ultralong cycle stability of aqueous zinc-ion batteries with zinc vanadium oxide cathodes. [europepmc]
- An organic/inorganic electrode-based hydronium-ion battery. [europepmc]
- Revealing High Na-Content P2-Type Layered Oxides as Advanced Sodium-Ion Cathodes. [europepmc]
- A reflection on lithium-ion battery cathode chemistry. [europepmc]
- Lamella-nanostructured eutectic zinc-aluminum alloys as reversible and dendrite-free anodes for aqueous rechargeable batteries. [europepmc]
- A chemically self-charging aqueous zinc-ion battery. [europepmc]
- Roadmap for advanced aqueous batteries: From design of materials to applications. [europepmc]
- Shape adaptable and highly resilient 3D braided triboelectric nanogenerators as e-textiles for power and sensing. [europepmc]
- A Perspective toward Practical Lithium-Sulfur Batteries. [europepmc]
- Production of high-energy Li-ion batteries comprising silicon-containing anodes and insertion-type cathodes. [europepmc]
- Hierarchically structured porous materials: synthesis strategies and applications in energy storage. [europepmc]
Related