2025/02/10 by Manuel Alejandro Del Rio Viera, E. Buschmann, Viera, Manuel A. Del Rio +47
Engineering · #Electromagnetic Compatibility and Measurements #Non-Destructive Testing Techniques #Advanced Electrical Measurement Techniques
paper · pdf · doi:10.48550/arxiv.2502.06675
The goal of the TANGERINE project is to develop the next generation of monolithic silicon pixel detectors using a 65 nm CMOS imaging process, which offers a higher logic density and overall lower power consumption compared to previously used processes. A combination of Technology Computer-Aided Design (TCAD) and Monte Carlo (MC) simulations is used to understand the physical processes within the sensing element and thus the overall performance of the pixel detector. The response of the sensors can then be tested in laboratory and test beam facilities and compared to simulation results. Transient simulations allow for studying the response of the sensor as a function of time, such as the signal produced after a charged particle passes through the sensor. The study of these signals is important to understand the magnitude and timing of the response from the sensors and improve upon them. While TCAD simulations are accurate, the time required to produce a single pulse is large compared to a combination of MC and TCAD simulations. In this work, a validation of the transient simulation approach and studies on charge collection are presented.